Show Copper-Ports Tdr - HP Bc1500 - BladeSystem - Blade PC Reference Manual
Blade switch
Hide thumbs
Also See for Bc1500 - BladeSystem - Blade PC:
- User manual (216 pages) ,
- Setup and installation manual (149 pages) ,
- Supplementary manual (45 pages)
Table of Contents
Advertisement
PHY Diagnostics Commands
show copper-ports tdr
The show copper-ports tdr User EXEC mode command displays information on the last Time
Domain Reflectometry (TDR) test performed on copper ports.
Syntax
show copper-ports tdr [interface]
Parameters
■
interface — A valid Ethernet port. (Full syntax: port)
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode
Command Usage
The maximum length of the cable for the TDR test is 120 meters.
Example
The following command displays information on the last TDR test performed on all copper ports.
Console> show copper-ports tdr
Port
----
1/e1
1/e2
1/e3
1/e4
1/g1
15-2
Result
------
OK
Short
Test has not been performed
Open
Fiber
www.hp.com
Length [meters]
Date
---------------
----
50
13:32:00 23 July 2005
64
13:32:00 23 July 2005
-
-
HP PC Blade Switch CLI Reference Guide
Advertisement
Table of Contents
