Clear Spanning-Tree Detected-Protocols - HP Bc1500 - BladeSystem - Blade PC Reference Manual
Blade switch
Hide thumbs
Also See for Bc1500 - BladeSystem - Blade PC:
- User manual (216 pages) ,
- Setup and installation manual (149 pages) ,
- Supplementary manual (45 pages)
Table of Contents
Advertisement
Spanning-Tree Commands
clear spanning-tree detected-protocols
The clear spanning-tree detected-protocols Privileged EXEC mode command restarts the
protocol migration process (forces renegotiation with neighboring devices) on all interfaces or on
a specified interface.
Syntax
clear spanning-tree detected-protocols [ethernet interface | port-channel
port-channel-number]
Parameters
■
interface — A valid Ethernet port.
■
port-channel-number — A valid port-channel number.
Default Setting
This command has no default configuration.
Command Modes
Privileged EXEC mode
Command Usage
This feature should be used only when working in RSTP or MSTP mode.
Example
The following command restarts the protocol migration process on Ethernet port 1/e11.
Console# clear spanning-tree detected-protocols ethernet 1/e11
22-14
www.hp.com
HP PC Blade Switch CLI Reference Guide
Advertisement
Table of Contents
