SNMP Commands
snmp-server location
The snmp-server location Global Configuration mode command configures the system location
string. To remove the location string, use the no form of this command.
Syntax
snmp-server location text
no snmp-server location
Parameters
■
text — Specifies a string that describes system location information. (Range: 0-160
characters)
Default Setting
This command has no default configuration.
Command Mode
Global Configuration mode
Command Usage
Do not include spaces in the text string or place text that includes spaces inside quotation marks.
Example
The following command defines the device location as New_York.
Console(config)# snmp-server location New_York
21-16
www.hp.com
HP PC Blade Switch CLI Reference Guide