Line Commands
speed
The speed Line Configuration mode command sets the line baud rate. To return to the default
configuration, use the no form of the command.
Syntax
speed bps
no speed
Parameters
■
bps — Baud rate in bits per second (bps). Possible values are 2400, 9600, 19200, 38400,
57600 and 115200.
Default Setting
The default speed is 9600 bps.
Command Mode
Line Configuration (console) mode
Command Usage
This command is available only on the line console.
The configured speed is applied when Autobaud is disabled. This configuration applies only to
the current session.
Example
The following command configures the line baud rate to 115200.
Console(config)# line console
Console(config-line)# speed 115200
13-2
www.hp.com
HP PC Blade Switch CLI Reference Guide