Snmp-Server Trap Authentication - HP Bc1500 - BladeSystem - Blade PC Reference Manual
Blade switch
Hide thumbs
Also See for Bc1500 - BladeSystem - Blade PC:
- User manual (216 pages) ,
- Setup and installation manual (149 pages) ,
- Supplementary manual (45 pages)
Table of Contents
Advertisement
SNMP Commands
snmp-server trap authentication
The snmp-server trap authentication Global Configuration mode command enables the device
to send SNMP traps when authentication fails. To disable SNMP failed authentication traps, use
the no form of this command.
Syntax
snmp-server trap authentication
no snmp-server trap authentication
Parameters
There are no parameters for this command.
Default Setting
SNMP failed authentication traps are enabled.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command enables SNMP failed authentication traps.
Console(config)# snmp-server trap authentication
21-14
www.hp.com
HP PC Blade Switch CLI Reference Guide
Advertisement
Table of Contents
