HP Bc1500 - BladeSystem - Blade PC Reference Manual page 20

Command Line Interface
Command Group
RADIUS Commands
RMON Commands
SNMP Commands
Spanning-Tree Commands Configure the spanning-tree functionality.
SSH Commands
Syslog Commands
System Management
Commands
TACACS+ Commands
User Interface Commands Display and list system, version or Telnet session
VLAN Commands
Web Server Commands
1-8
Description
Specify the source IP address used for communication
with Remote Authentication Dial-in User Service
(RADIUS) servers, and display the RADIUS server
settings.
Display the Remote Network Monitoring (RMON)
Ethernet history statistics, alarms table and
configuration.
Configure the community access string to permit
access to the Simple Network Management Protocol
(SNMP) server, create or update SNMP server entries,
and specify SNMP engineID.
Display the Secure Socket Shell (SSH) public keys on
the device, SSH server configuration, or which SSH
public key is manually configured.
Log messages to a syslog server, or limit log messages
to a syslog server.
Display and list system, version or Telnet session
information.
Display configuration and statistical information about
a Terminal Access Controller Access Control System
(TACACS+) server, or specify a TACACS+ host.
information.
Enter the (Virtual Local Area Network) VLAN
Configuration mode, enable simultaneously
configuring multiple VLANs, or adds or remove
VLANs.
Enable configuring the device from a browser, or
display the HTTP server configuration.
www.hp.com
Page
19-1
20-1
21-1
22-1
23-1
24-1
25-1
26-1
27-1
28-1
29-1
CLI Reference Guide