Lacp Port-Priority - HP Bc1500 - BladeSystem - Blade PC Reference Manual
Blade switch
Hide thumbs
Also See for Bc1500 - BladeSystem - Blade PC:
- User manual (216 pages) ,
- Setup and installation manual (149 pages) ,
- Supplementary manual (45 pages)
Table of Contents
Advertisement
LACP Commands
lacp port-priority
The lacp port-priority Interface Configuration (Ethernet) mode command configures physical
port priority. To return to the default configuration, use the no form of this command.
Syntax
lacp port-priority value
no lacp port-priority
Parameters
■
value — Specifies port priority. (Range: 1 - 65535)
Default Setting
The default port priority is 1.
Command Mode
Interface Configuration (Ethernet) mode
Command Usage
There are no user guidelines for this command.
Example
The following command defines the priority of Ethernet port 1/e6 as 247.
Console(config)# interface ethernet 1/e6
Console(config-if)# lacp port-priority 247
12-2
www.hp.com
HP PC Blade Switch CLI Reference Guide
Advertisement
Table of Contents
