QoS Commands
match
The match Class-map Configuration mode command defines the match criteria for classifying
traffic. To delete the match criteria, use the no form of this command.
Syntax
match access-group acl-name
no match access-group acl-name
Parameters
■
acl-name — Specifies the name of an IP or MAC ACL.
Default Setting
No match criterion is supported.
Command Mode
Class-map Configuration mode.
Command Usage
There are no user guidelines for this command.
Example
The following command defines the match criterion for classifying traffic as an access group
called HP in a class map called class1.
Console(config)# class-map class1
Console(config-cmap)# match access-group hp
18-6
www.hp.com
HP PC Blade Switch CLI Reference Guide