aaa authentication dot1x
The aaa authentication dot1x Global Configuration mode command specifies one or more
authentication, authorization, and accounting (AAA) methods for use on interfaces running IEEE
802.1x. To return to the default configuration, use the no form of this command.
Syntax
aaa authentication dot1x default method1 [method2...]
no aaa authentication dot1x default
Parameters
■
method1 [method2...] - At least one keyword, as listed in the following table:
Keyword
radius
none
Default Setting
No authentication method is defined.
Command Mode
Global Configuration
Command Usage
Additional methods of authentication are used only if the previous method returns an error and
not if the request for authentication is denied. To ensure that authentication succeeds even if all
methods return an error, specify none as the final method in the command line.
The RADIUS server must support MD-5 challenge and EAP type frames.
Example
The following command uses the aaa authentication dot1x default with no authentication.
Console(config)# aaa authentication dot1x default none
HP PC Blade Switch CLI Reference Guide
Description
Uses the list of all RADIUS servers for authentication.
Uses no authentication.
www.hp.com
802.1x Commands
2
2-1