Qos Cos - HP Bc1500 - BladeSystem - Blade PC Reference Manual
Blade switch
Hide thumbs
Also See for Bc1500 - BladeSystem - Blade PC:
- User manual (216 pages) ,
- Setup and installation manual (149 pages) ,
- Supplementary manual (45 pages)
Table of Contents
Advertisement
QoS Commands
qos cos
The qos cos Interface Configuration (Ethernet, port-channel) mode command defines the default
CoS value of a port. To return to the default configuration, use the no form of this command.
Syntax
qos cos default-cos
Parameters
■
default-cos — Specifies the default CoS value of the port. (Range: 0-7)
Default Setting
Default CoS value of a port is 0.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
Command Usage
If the port is trusted, the default CoS value of the port is used to assign a CoS value to all
untagged packets entering the port.
Example
The following command configures port 1/e15 default CoS value to 3.
Console(config)# interface ethernet 1/e15
Console(config-if) qos cos 3
18-28
www.hp.com
HP PC Blade Switch CLI Reference Guide
Advertisement
Table of Contents
