Radius-Server Timeout - HP Bc1500 - BladeSystem - Blade PC Reference Manual
Blade switch
Hide thumbs
Also See for Bc1500 - BladeSystem - Blade PC:
- User manual (216 pages) ,
- Setup and installation manual (149 pages) ,
- Supplementary manual (45 pages)
Table of Contents
Advertisement
RADIUS Commands
radius-server timeout
The radius-server timeout Global Configuration mode command sets the interval during which
the device waits for a server host to reply. To return to the default configuration, use the no form
of this command.
Syntax
radius-server timeout timeout
no radius-server timeout
Parameters
■
timeout — Specifies the timeout value in seconds. (Range: 1-30)
Default Setting
The timeout value is 3 seconds.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command configures the timeout interval to 5 seconds.
Console(config)# radius-server timeout 5
19-6
www.hp.com
HP PC Blade Switch CLI Reference Guide
Advertisement
Table of Contents
