Show Qos Aggregate-Policer - HP Bc1500 - BladeSystem - Blade PC Reference Manual
Blade switch
Hide thumbs
Also See for Bc1500 - BladeSystem - Blade PC:
- User manual (216 pages) ,
- Setup and installation manual (149 pages) ,
- Supplementary manual (45 pages)
Table of Contents
Advertisement
show qos aggregate-policer
The show qos aggregate-policer User EXEC mode command displays the aggregate policer
parameter.
Syntax
show qos aggregate-policer [aggregate-policer-name]
Parameters
■
aggregate-policer-name — Specifies the name of the aggregate policer to be displayed.
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode
Command Usage
There are no user guidelines.
Example
The following command displays the parameters of the aggregate policer called policer1.
Console> show qos aggregate-policer policer1
aggregate-policer policer1 96000 4800 exceed-action drop
not used by any policy map
HP PC Blade Switch CLI Reference Guide
www.hp.com
QoS Commands
18-15
Advertisement
Table of Contents
