dot1x timeout re-authperiod
The dot1x timeout re-authperiod Interface Configuration mode command sets the number of
seconds between re-authentication attempts. To return to the default configuration, use the no
form of this command.
Syntax
dot1x timeout re-authperiod seconds
no dot1x timeout re-authperiod
Parameters
■
seconds — Number of seconds between re-authentication attempts.
(Range: 300-4294967295)
Default Setting
Re-authentication period is 3600 seconds.
Command Mode
Interface Configuration (Ethernet) mode
Command Usage
There are no user guidelines for this command.
Example
The following command sets the number of seconds between re-authentication attempts, to 300.
Console(config)# interface ethernet 1/e16
Console(config-if)# dot1x timeout re-authperiod 300
HP PC Blade Switch CLI Reference Guide
www.hp.com
802.1x Commands
2-5