AAA Commands
ip https authentication
The ip https authentication Global Configuration mode command specifies authentication
methods for HTTPS server users. To return to the default configuration, use the no form of this
command.
Syntax
ip https authentication method1 [method2...]
no ip https authentication
Parameters
■
method1 [method2...] — Specify at least one from the following table:
Keyword
local
none
radius
tacacs
Default Setting
The local user database is checked. This has the same effect as the command ip https
authentication local.
Command Mode
Global Configuration mode
Command Usage
The additional methods of authentication are used only if the previous method returns an error,
not if it fails. To ensure that the authentication succeeds even if all methods return an error,
specify none as the final method in the command line.
Example
The following command configures HTTPS authentication.
Console(config)# ip https authentication radius local
3-8
Source or Destination
Uses the local username database for authentication.
Uses no authentication.
Uses the list of all RADIUS servers for authentication.
Uses the list of all TACACS+ servers for authentication.
www.hp.com
HP PC Blade Switch CLI Reference Guide