HP Bc1500 - BladeSystem - Blade PC Reference Manual page 111

Backing up the Running or Startup Configuration to a Backup Configuration File
To copy the running configuration file to a backup configuration file, enter the copy
running-config file command. To copy the startup configuration file to a backup configuration
file, enter the
c
Before copying from the backup configuration file to the running configuration file, make sure
that the backup configuration file has not been corrupted.
Example
The following command copies system image file1 from the TFTP server 172.16.101.101 to a
non-active image file.
Console# copy tftp://172.16.101.101/file1 image
Accessing file 'file1' on 172.16.101.101...
Loading file1 from 172.16.101.101: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[OK]
Copy took 0:01:11 [hh:mm:ss]
HP PC Blade Switch CLI Reference Guide
opy startup-config file command.
Configuration and Image File Commands
www.hp.com 7-3