Management Access-Class - HP Bc1500 - BladeSystem - Blade PC Reference Manual

management access-class

The management access-class Global Configuration mode command restricts management
connections by defining the active management access list. To disable this restriction, use the no
form of this command.
Syntax
management access-class {console-only | name}
no management access-class
Parameters
■
console-only — Indicates that the device can be managed only from the console.
■
name — Specifies the name of the access list to be used. (Range: 1-32 characters)
Default Setting
No active management access list specified.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command configures an access list called mlist as the management access list.
Console(config)# management access-class mlist
HP PC Blade Switch CLI Reference Guide www.hp.com
Management ACL Commands
14-5