Logging Buffered - HP Bc1500 - BladeSystem - Blade PC Reference Manual

Syslog Commands

logging buffered

The logging buffered Global Configuration mode command limits syslog messages displayed
from an internal buffer based on severity. To cancel using the buffer, use the no form of this
command.
Syntax
logging buffered level
no logging buffered
Parameters
■
level — Specifies the severity level of messages logged in the buffer. Possible values:
emergencies, alerts, critical, errors, warnings, notifications, informational and
debugging.
Default Setting
The default severity level is informational.
Command Mode
Global Configuration mode
Command Usage
All the syslog messages are logged to the internal buffer. This command limits the messages
displayed to the user.
Example
The following command limits syslog messages displayed from an internal buffer based on
severity level debugging.
Console(config)# logging buffered debugging
24-4 www.hp.com HP PC Blade Switch CLI Reference Guide