Command Groups - HP Bc1500 - BladeSystem - Blade PC Reference Manual

Command Groups

The system commands can be broken down into the functional groups shown below
Command Groups
Command Group
802.1x Commands
AAA Commands
ACL Commands
Address Table Commands Register MAC-layer multicast addresses, and handle
Clock Commands
Configuration and Image
File Commands
Ethernet Configuration
Commands
GVRP Commands
IGMP Snooping
Commands
IP Addressing Commands Define a default gateway, set an IP address for
LACP Commands
Line Commands
Management ACL
Commands
PHY Diagnostics
Commands
Port Channel Commands
Port Monitor Commands
QoS Commands
HP PC Blade Switch CLI Reference Guide
Description
Specify authentication, authorization and accounting
(AAA) methods for use on interfaces running IEEE
802.1x, and enable 802.1x globally.
Define the authentication method lists for servers.
Display Access Control Lists (ACLs) defined on the
device.
MAC-layer secure address to a routed port.
Show the configuration or status of the Simple
Network Time Protocol (SNTP).
Display the contents of the currently running
configuration file, specify contents of image files.
Configure multiple Ethernet type interfaces.
Display the GARP VLAN Registration Protocol (GVRP)
configuration information, enable GVRP globally or on
an interface.
Enable the Internet Group Management Protocol
(IGMP) snooping.
interface, delete entries from the host.
Configure system or port priority using the Link
Aggregation Control Protocol (LACP).
Display line parameters, enable the command history
function, or configure the command history buffer size.
Define a permit or deny a rule, or configure a
management access control list.
Display the optical transceiver diagnostics.
Enter the interface configuration mode to configure a
specific, or a multiple port-channel.
Start a port monitoring session, or display the port
monitoring status.
Enable Quality of Service (QoS) on the device, create
policy maps, and define traffic classifications
www.hp.com
Command Line Interface
.
Page
2-1
3-1
4-1
5-1
6-1
7-1
8-1
9-1
10-1
11-1
12-1
13-1
14-1
15-1
16-1
17-1
18-1
1-7