Spanning-Tree Commands
revision (mst)
The revision MST configuration command defines the configuration revision number. To return
to the default configuration, use the no form of this command.
Syntax
revision value
no revision
Parameters
■
value — Configuration revision number (Range: 0-65535).
Default Setting
The default configuration revision number is 0.
Command Mode
MST Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command sets the configuration revision to 1.
console(config) # spanning-tree mst configuration
console(config-mst) # revision 1
22-22
www.hp.com
HP PC Blade Switch CLI Reference Guide