Show Snmp Filters - HP Bc1500 - BladeSystem - Blade PC Reference Manual

show snmp filters

The show snmp filters Privileged EXEC mode command displays the configuration of filters.
Syntax
show snmp filters [filtername]
Parameters
■
filtername — Specifies the name of the filter. (Range: 1-30)
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command displays the configuration of filters.
Console# show snmp filters
Name
-----------
user-filter
user-filter
user-filter
HP PC Blade Switch CLI Reference Guide
OID Tree
-----------------------
1.3.6.1.2.1.1
1.3.6.1.2.1.1.7
1.3.6.1.2.1.2.2.1.*.1
www.hp.com
SNMP Commands
Type
---------
Included
Excluded
Included
21-23