Show Snmp Groups - HP Bc1500 - BladeSystem - Blade PC Reference Manual

SNMP Commands

show snmp groups

The show snmp groups Privileged EXEC mode command displays the configuration of groups.
Syntax
show snmp groups [groupname]
Parameters
■
groupname — Specifies the name of the group. (Range: 1-30)
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command displays the configuration of views.
Console# show snmp groups
Name
--------------
user-group
managers-group
managers-group
The following table describes significant fields shown in the example.
Field
Name
Security Model
Security Level
Views Read
Write
Notify
21-22
Security
Model Level
----- -----
V3 priv
V3 priv
V3 priv
Description
Name of the group.
SNMP model in use (v1, v2 or v3).
Authentication of a packet with encryption. Applicable only to the SNMP
v3 security model.
Name of the view that enables only viewing the contents of the agent. If
unspecified, all objects except the community-table and SNMPv3 user and
access tables are available.
Name of the view that enables entering data and managing the contents of
the agent.
Name of the view that enables specifying an inform or a trap.
www.hp.com
Views
Read Write
------- -------
Default ""
Default Default
Default ""
HP PC Blade Switch CLI Reference Guide
Notify
-------
""
""
""