Mac Access-List - HP Bc1500 - BladeSystem - Blade PC Reference Manual
Blade switch
Hide thumbs
Also See for Bc1500 - BladeSystem - Blade PC:
- User manual (216 pages) ,
- Setup and installation manual (149 pages) ,
- Supplementary manual (45 pages)
Table of Contents
Advertisement
mac access-list
The mac access-list Global Configuration mode command enables the MAC-Access List
Configuration mode and creates Layer 2 ACLs. To delete an ACL, use the no form of this
command.
Syntax
mac access-list name
no mac access-list name
Parameters
■
name — Specifies the name of the ACL.
Default Setting
The default for all ACLs is deny all.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command creates a MAC ACL.
Console(config)# mac access-list macl-acl1
Console(config-mac-al)#
HP PC Blade Switch CLI Reference Guide
www.hp.com
ACL Commands
4-7
Advertisement
Table of Contents
