Show Arp - HP Bc1500 - BladeSystem - Blade PC Reference Manual

IP Addressing Commands

show arp

The show arp Privileged EXEC mode command displays entries in the ARP table.
Syntax
show arp
Parameters
There are no parameters for this command.
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command displays entries in the ARP table.
Console# show arp
ARP timeout: 80000 Seconds
Interface
---------
1/e1
2/e2
11-8
IP address HW address
---------- -----------------
10.7.1.102 00:10:B5:04:DB:4B
10.7.1.135 00:50:22:00:2A:A4
www.hp.com
Status
-------
Dynamic
Static
HP PC Blade Switch CLI Reference Guide