Installing microsoft windows vista on selected hp products (8 pages)
Summary of Contents for HP bc1000 - Blade PC
Page 1
Service Reference Guide HP Blade PC bc1000 and bc1500 Series 5th Edition This document provides information on spare parts, the removal and replacement of all parts, as well as information on troubleshooting, POST error messages, and diagnostic indicator lights. Document Part Number 352971-005...
Page 3
Service Reference Guide HP Blade PC bc1000 and bc1500 Series 5th Edition Document Part Number: 352971-005 1st Edition (March 2004) 5th edition (May 2007) May 2007...
Page 4
All other product names mentioned herein may be trademarks of their respective companies. Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. The information in this document is provided “as is”...
Spare Parts Spare Parts Spare Parts bc1000 Spare bc1500 Spare Item Description Part Number Part Number Blade PC complete with 1 memory module 4, 404273-001 404273-001 hard drive 2, and RTC battery 5 Blade PC complete with 1 memory module 1, 407510-291 hard drive 2, and RTC battery 3 (Japan only) Blade PC with RTC battery 5 but no other parts.
Page 8
Spare Parts 1–2 352971-005 Service Reference Guide bc1000 and bc1500...
Removal and Replacement ✎ The Blade PC may be covered under an advance exchange warranty provision. Check the warranty documentation that came with your Blade PC for more information. Returning the Blade PC Before returning the Blade PC for repairs: 1.
Page 10
Removal and Replacement Item Status Description Unit Off = Identification Blue = Identification of blade PC Blue blinking = Being emotely accessed Health Off = Blade PC off Green = Blade PC on and good health Amber = Blade PC degraded or power-up prohibited ny the Integrated Administrator.
Page 11
Removal and Replacement 2.2.2 Removing the BladeSystem PC To remove a blade PC: 1. Power down the blade PC. See “Removal and Replacement” on page 1 2. Press the release latch 1. 3. Pull down the ejector lever 2. 4. Remove the blade PC from the enclosure. To install a new blade PC, reverse the removal procedures.
Removal and Replacement 2.2.3 Replacing the Memory 1. Power down the blade PC. See “Removal and Replacement” on page 1 2. Remove the blade. 3. Release the latches on each side of the DIMM slot 1. This will allow the module to rotate upwards.
Page 13
Removal and Replacement To replace the module: 1. Insert the DIMM at a 15 degree angle 1, making sure that the notch on the bottom of the DIMM aligns with the notch in the socket. 2. Press the DIMM down towards the board 2, ensuring that it is fully seated and the two latches snap into place.
Removal and Replacement 2.2.4 Installing the Optional Graphics Diagnostic Card 1. Power down the Blade PC. 2. Remove the blade. 3. Lay the Blade PC down on a flat surface and install the graphics card into the sockets. ✎ The card’s pins are keyed so that it will only install one way. To remove the card, pull it firmly, straight out of the sockets.
Removal and Replacement 2.2.5 Installing the Diagnostic Adapter 1. Power down the Blade PC. 2. Insert the adapter into the diagnostic connector on the front of the blade 1. 3. Tighten the thumbscrews that secure the adapter in place 2. Attaching the USB 1.1 diagnostic adapter Attaching the USB 2.0 diagnostic adapter To remove the diagnostic adapter, reverse the removal procedures.
Page 16
Removal and Replacement 2–8 352971-004 Service Reference Guide bc1000 and bc1500...
Connectors and Passwords 3.2 Passwords 3.2.1 Remove a Setup Password 1. Power down the Blade PC. 2. Remove the blade. 3. Install a jumper on the E49 header. 4. Power up the unit. The password is now removed. 3.2.2 Establish a Setup Password Power down the Blade PC.
Diagnostics Diagnostic Indicator Lights Diagnostic Indicator Lights Health Activity Problem Corrective Action Solid VRM (Blade system Replace blade. board) failure 2 Blinks Unit overheating • Check processor heatsink. • Verify system fans working properly. • Replace blade. 3 Blinks CPU (Blade system Replace blade.
Page 20
Diagnostics Diagnostic Indicator Lights Health Activity Problem Corrective Action Amber# Solid Temperature Caution Blade has shut down gracefully becasue of an graceful shutdown overtemperature situation. When main power is reestablished, the condition will self-correct but post-video POST message will be displayed. NONE NONE Enclosure or blade...
Diagnostics 4.2 POST (Power On Self Test) Error Messages POST Error Messages Health Message Corrective Action 101-Option ROM Checksum • Clear CMOS Error • Flash ROM if necessary. • Replace the blade. 102/103-System Board error • Clear CMOS. • Replace the blade. 162-System Options Not Set Amber •...
Page 22
Diagnostics POST Error Messages Health Message Corrective Action 1782-Disk Controller Failure • Run Computer Setup IDE self test from Computer Setup. • Replace hard drive. • Replace blade. 1790-Disk 0 Error Amber • Run Computer Setup IDE self test from Computer Setup.