Show Dot1X Users - HP Bc1500 - BladeSystem - Blade PC Reference Manual

show dot1x users

The show dot1x users Privileged EXEC mode command displays active 802.1x authenticated
users for the device.
Syntax
show dot1x users [username username]
Parameters
■
username — Supplicant username (Range: 1-160 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following commands display 802.1x users.
Console# show dot1x users
Port
-----
1/e1
1/e2
Console# show dot1x users username Bob
Username: Bob
Port
-----
1/e1
The following table describes the significant fields shown in the example:
Keyword
Port
Username
Session Time
Authentication Method
MAC Address
HP PC Blade Switch CLI Reference Guide
Username Session Time
-------- ------------
Bob 1d:03:08.58
John 08:19:17
Username Session Time
-------- ------------
Bob 1d:03:08.58
Description
The port number.
The username representing the identity of the Supplicant.
The period of time the Supplicant is connected to the system.
Authentication method used by the Supplicant to open the session.
MAC address of the Supplicant.
www.hp.com
802.1x Commands
Auth Method MAC Address
----------- --------------
Remote 0008:3b79:8787
None 0008:3b89:3127
Auth Method MAC Address
----------- --------------
Remote 0008:3b79:8787
2-15