Port Security Max - HP Bc1500 - BladeSystem - Blade PC Reference Manual

Address Table Commands

port security max

The port security max Interface Configuration (Ethernet, port-channel) mode command
configures the maximum number of addresses that can be learned on the port while the port is in
port security mode. To return to the default configuration, use the no form of this command.
Syntax
port security max max-addr
no port security max
Parameters
■
max-addr — Maximum number of addresses that can be learned by the port. (Range: 1-128)
Default Setting
The default is 1 address.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
Command Usage
This command is only relevant in dynamic learning modes.
Example
The following command sets the maximum number of addresses that are learned on port 1/e7
before it is locked to 20.
Console(config)# interface ethernet 1/e7
Console(config-if)# port security mode dynamic
Console(config-if)# port security max 20
5-12 www.hp.com HP PC Blade Switch CLI Reference Guide