Tacacs-Server Timeout - HP Bc1500 - BladeSystem - Blade PC Reference Manual
Blade switch
Hide thumbs
Also See for Bc1500 - BladeSystem - Blade PC:
- User manual (216 pages) ,
- Setup and installation manual (149 pages) ,
- Supplementary manual (45 pages)
Table of Contents
Advertisement
TACACS+ Commands
tacacs-server timeout
The tacacs-server timeout Global Configuration mode command sets the interval during which
the device waits for a TACACS+ server to reply. To return to the default configuration, use the no
form of this command.
Syntax
tacacs-server timeout timeout
no tacacs-server timeout
Parameters
■
timeout — Specifies the timeout value in seconds. (Range: 1-30)
Default Setting
5 seconds
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command sets the timeout value to 30.
Console(config)# tacacs-server timeout 30
26-4
www.hp.com
HP PC Blade Switch CLI Reference Guide
Advertisement
Table of Contents
