Sntp Authenticate - HP Bc1500 - BladeSystem - Blade PC Reference Manual
Blade switch
Hide thumbs
Also See for Bc1500 - BladeSystem - Blade PC:
- User manual (216 pages) ,
- Setup and installation manual (149 pages) ,
- Supplementary manual (45 pages)
Table of Contents
Advertisement
sntp authenticate
The sntp authenticate Global Configuration mode command grants authentication for received
Simple Network Time Protocol (SNTP) traffic from servers. To disable the feature, use the no
form of this command.
Syntax
sntp authenticate
no sntp authenticate
Parameters
There are no parameters for this command.
Default Setting
No authentication
Command Mode
Global Configuration mode
Command Usage
The command is relevant for both unicast and broadcast.
Example
The following command defines the authentication key for SNTP and grants authentication.
Console(config)# sntp authentication-key 8 md5 ClkKey
Console(config)# sntp trusted-key 8
Console(config)# sntp authenticate
HP PC Blade Switch CLI Reference Guide
www.hp.com
Clock Commands
6-7
Advertisement
Table of Contents
