Telnet - HP Bc1500 - BladeSystem - Blade PC Reference Manual

telnet

The telnet User EXEC mode command enables logging on to a host that supports Telnet.
Syntax
telnet {ip-address | hostname} [port] [keyword1......]
Parameters
■
ip-address — IP address of the destination host.
■
hostname — Host name of the destination host. (Range: 1-158 characters)
■
port — A decimal TCP port number, or one of the keywords listed in the Ports table in the
Command Usage.
■
keyword — One or more keywords listed in the Keywords table in the Command Usage.
Default Setting
The default port is the Telnet port (decimal23) on the host.
Command Mode
User EXEC mode
Command Usage
Telnet software supports special Telnet commands in the form of Telnet sequences that map
generic terminal control functions to operating system-specific functions. To enter a Telnet
sequence, press the escape sequence keys (Ctrl-shift-6) followed by a Telnet command character.
Telnet Sequence
Telnet Sequence
Ctrl-shift-6-b
Ctrl-shift-6-c
Ctrl-shift-6-h
Ctrl-shift-6-o
Ctrl-shift-6-t
Ctrl-shift-6-u
HP PC Blade Switch CLI Reference Guide
Purpose
Break
Interrupt Process (IP)
Erase Character (EC)
Abort Output (AO)
Are You There? (AYT)
Erase Line (EL)
www.hp.com
System Management Commands
25-5