Sntp Client Poll Timer - HP Bc1500 - BladeSystem - Blade PC Reference Manual

sntp client poll timer

The sntp client poll timer Global Configuration mode command sets the polling time for the
Simple Network Time Protocol (SNTP) client. To return to default configuration, use the no form
of this command.
Syntax
sntp client poll timer seconds
no sntp client poll timer
Parameters
■
seconds — Polling interval in seconds (Range: 60-86400)
Default Setting
Polling interval is 1024 seconds.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command sets the polling time for the Simple Network Time Protocol (SNTP)
client to 120 seconds.
Console(config)# sntp client poll timer 120
HP PC Blade Switch CLI Reference Guide www.hp.com
Clock Commands
6-9