Sntp Unicast Client Poll - HP Bc1500 - BladeSystem - Blade PC Reference Manual
Blade switch
Hide thumbs
Also See for Bc1500 - BladeSystem - Blade PC:
- User manual (216 pages) ,
- Setup and installation manual (149 pages) ,
- Supplementary manual (45 pages)
Table of Contents
Advertisement
Clock Commands
sntp unicast client poll
The sntp unicast client poll Global Configuration mode command enables polling for the
Simple Network Time Protocol (SNTP) predefined unicast servers. To disable the polling for
SNTP client, use the no form of this command.
Syntax
sntp unicast client poll
no sntp unicast client poll
Parameters
There are no parameters for this command.
Default Setting
Polling is disabled.
Command Mode
Global Configuration mode
Command Usage
Polling time is determined by the sntp client poll timer Global Configuration mode command.
Example
The following command enables polling for SNTP predefined unicast clients.
Console(config)# sntp unicast client poll
6-14
www.hp.com
HP PC Blade Switch CLI Reference Guide
Advertisement
Table of Contents
