HP Bc1500 - BladeSystem - Blade PC Reference Manual page 276
Blade switch
Hide thumbs
Also See for Bc1500 - BladeSystem - Blade PC:
- User manual (216 pages) ,
- Setup and installation manual (149 pages) ,
- Supplementary manual (45 pages)
Table of Contents
Advertisement
SNMP Commands
When a show running-config Privileged EXEC mode command is entered, a line for this user
will not be displayed. To see if this user has been added to the configuration, type the show snmp
users Privileged EXEC mode command.
An SNMP EngineID has to be defined to add SNMP users to the device. Changing or removing
the SNMP EngineID value deletes SNMPv3 users from the device's database.
The remote engineid designates the remote management station and should be defined to enable
the device to receive informs.
Example
The following command configures an SNMPv3 user John in group user-group.
Console(config)# snmp-server user John user-group
21-6
www.hp.com
HP PC Blade Switch CLI Reference Guide
Advertisement
Table of Contents
