Spanning-Tree Mst Port-Priority - HP Bc1500 - BladeSystem - Blade PC Reference Manual

spanning-tree mst port-priority

The spanning-tree mst port-priority Interface Configuration mode command configures port
priority for the specified MST instance. To return to the default configuration, use the no form of
this command.
Syntax
spanning-tree mst instance-id port-priority priority
no spanning-tree mst
Parameters
■
instance-ID — ID of the spanning tree instance. (Range: 1-16)
■
priority — The port priority. (Range: 0-240 in multiples of 16)
Default Setting
The default port priority for IEEE Multiple Spanning Tree Protocol (MSTP) is 128.
Command Modes
Interface Configuration (Ethernet, port-channel) mode
Command Usage
There are no user guidelines for this command.
Example
The following command configures the port priority of port 1/g1 to 142.
Console(config)# interface ethernet 1/g1
Console(config-if)# spanning-tree mst 1 port-priority 142
HP PC Blade Switch CLI Reference Guide
nstance-id port-priority
i
www.hp.com
Spanning-Tree Commands
22-17