Radius-Server Key - HP Bc1500 - BladeSystem - Blade PC Reference Manual

radius-server key

The radius-server key Global Configuration mode command sets the authentication and
encryption key for all RADIUS communications between the device and the RADIUS daemon.
To return to the default configuration, use the no form of this command.
Syntax
radius-server key [key-string]
no radius-server key
Parameters
■
key-string — Specifies the authentication and encryption key for all RADIUS
communications between the device and the RADIUS server. This key must match the
RADIUS daemon key used on the RADIUS daemon. (Range: 0-128 characters)
Default Setting
The key-string is an empty string.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command defines the authentication and encryption key for all RADIUS
communications between the device and the RADIUS daemon.
Console(config)# radius-server key hp-server
HP PC Blade Switch CLI Reference Guide www.hp.com
RADIUS Commands
19-3