Logging Buffered Size - HP Bc1500 - BladeSystem - Blade PC Reference Manual

logging buffered size

The logging buffered size Global Configuration mode command changes the number of syslog
messages stored in the internal buffer. To return to the default configuration, use the no form of
this command.
Syntax
logging buffered size number
no logging buffered size
Parameters
■
number — Specifies the maximum number of messages stored in the history table.
(Range: 20-400)
Default Setting
The default number of messages is 200.
Command Mode
Global Configuration mode
Command Usage
This command takes effect only after Reset.
Example
The following command changes the number of syslog messages stored in the internal buffer
to 300.
Console(config)# logging buffered size 300
HP PC Blade Switch CLI Reference Guide www.hp.com
Syslog Commands
24-5