Ip Address Dhcp - HP Bc1500 - BladeSystem - Blade PC Reference Manual

Blade switch
Hide thumbs Also See for Bc1500 - BladeSystem - Blade PC:
Table of Contents

Advertisement

IP Addressing Commands

ip address dhcp

ip address dhcp
The
acquires an IP address for an Ethernet interface from the Dynamic Host Configuration Protocol
(DHCP) server. To deconfigure an acquired IP address, use the no form of this command.
Syntax
ip address dhcp [hostname host-name]
no ip address dhcp
Parameters
host-name — Specifies the name of the host to be placed in the DHCP option 12 field. This
name does not have to be the same as the host name specified in the hostname Global
Configuration mode command. (Range: 1-20 characters)
Default Setting
This command has no default configuration.
Command Mode
Interface Configuration (Ethernet, VLAN, port-channel) mode
Command Usage
The ip address dhcp command allows any interface to dynamically learn its IP address by using
the DHCP protocol.
Some DHCP servers require that the DHCPDISCOVER message have a specific host name. The
ip address dhcp hostname host-name command is most typically used when the host name is
provided by the system administrator.
If the device is configured to obtain its IP address from a DHCP server, it sends a
DHCPDISCOVER message to provide information about itself to the DHCP server on the
network.
If the ip address dhcp command is used with or without the optional keyword, the DHCP option
12 field (host name option) is included in the DHCPDISCOVER message. By default, the
specified DHCP host name is the globally configured host name of the device. However, the ip
address dhcp hostname host-name command can be used to place a different host name in the
DHCP option 12 field.
The no ip address dhcp command de-configures any IP address that was acquired, thus sending
a DHCPRELEASE message.
Example
The following command acquires an IP address for Ethernet port 1/e16 from DHCP.
Console(config)# interface ethernet 1/e16
Console(config-if)# ip address dhcp
11-2
Interface Configuration (Ethernet, VLAN, port-channel) mode command
www.hp.com
HP PC Blade Switch CLI Reference Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bladesystem pc

Table of Contents