spanning-tree pvst-interop
The spanning-tree pvst-interop privileged EXEC command configures the device for
PVST/PVST+ interoperability.
Syntax
spanning-tree pvst-interop
✎
To disable this feature, see the
Parameters
This command has no arguments or keywords.
Default Setting
Enabled
Command Modes
Privileged EXEC
Command Usage
Before enabling this command the following is required:
■
The port mode of all the ports in switch is set to Access.
■
The number of VLANs in the switch is less then 16.
If there is a VLAN to MSTP mapping, the software asks the user to confirm that the existing
mapping would be deleted.
This command performs the following:
■
Enable MSTP.
■
Map each VLAN to MSTP instance.
■
Enable MSTP-to-STP conversion
The commands that shown in the startup-config, or running-config files, are the configuration
commands executed by the script and not the command itself.
Example
The following command executes a script that configures the device for PVST/PVST+
interoperability.
Console# spanning-tree pvst-interop
HP PC Blade Switch CLI Reference Guide
"spanning-tree mst mstp-rstp"
www.hp.com
Spanning-Tree Commands
command.
22-39