QoS Commands
show qos interface
The show qos interface User EXEC mode command displays Quality of Service (QoS)
information on the interface.
Syntax
show qos interface [ethernet interface-number | port-channel number ] [buffers | queueing |
policers | shapers]
Parameters
■
interface-number — Valid Ethernet port number.
■
number — Valid port-channel number.
■
buffers – Displays the buffer setting for the interface's queues. Displays the queue depth for
each queue and the thresholds for the WRED.
■
queuing — Displays the queue strategy (WRR or EF), the weight for WRR queues, the CoS
to queue map and the EF priority.
■
policers — Displays all the policers configured for this interface, their setting and the
number of policers currently unused.
■
shapers — Displays the shaper of the specified interface and the shaper for the queue on the
specified interface.
Default Setting
There is no default configuration for this command.
Command Mode
User EXEC mode
Command Usage
If no keyword is specified, port QoS mode (e.g., DSCP trusted, CoS trusted, untrusted), default
CoS value, DSCP-to-DSCP-mutation map attached to the port, and policy map attached to the
interface are displayed.
If no interface is specified, QoS information about all interfaces is displayed.
18-20
www.hp.com
HP PC Blade Switch CLI Reference Guide