port security mode
The port security mode Interface Configuration mode command configures the port security
mode. To return to the default configuration, use the no form of this command.
Syntax
port security mode {lock | dynamic}
no port security mode
Parameters
■
lock — Saves the current dynamic MAC addresses associated with the port and disables
learning, relearning and aging.
■
dynamic — Deletes the current dynamic MAC addresses associated with the port and learns
up to the maximum number addresses allowed on the port. Relearning and aging are enabled.
Default Setting
This setting is disabled.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
Command Usage
There are no user guidelines for this command.
Example
In the following command, the port security mode is set to dynamic for Ethernet interface 1/e7.
Console(config)# interface ethernet 1/e7
Console(config-if)# port security mode dynamic
HP PC Blade Switch CLI Reference Guide
www.hp.com
Address Table Commands
5-11