Show Lacp Ethernet - HP Bc1500 - BladeSystem - Blade PC Reference Manual

LACP Commands

show lacp ethernet

The show lacp ethernet Privileged EXEC mode command displays LACP information for
Ethernet ports.
Syntax
show lacp ethernet interface [parameters | statistics | protocol-state]
Parameters
■
interface — Valid Ethernet port. (Full syntax: port)
■
parameters — Link aggregation parameter information.
■
statistics — Link aggregation statistics information.
■
protocol-state — Link aggregation protocol-state information.
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
All LACP statistics is shown if no keyword is specified.
LACP should be enabled for selected Ethernet port.
Example
The following command displays LACP information for Ethernet port 1/e1.
Console# show lacp ethernet 1/e1
Port 1/e1 LACP parameters:
Actor
12-4
system priority:
system mac addr:
port Admin key:
port Oper key:
port Oper number:
port Admin priority:
port Oper priority:
port Admin timeout:
port Oper timeout:
LACP Activity:
Aggregation:
synchronization:
collecting:
www.hp.com
1
00:00:12:34:56:78
30
30
21
1
1
LONG
LONG
ACTIVE
AGGREGATABLE
FALSE
FALSE
HP PC Blade Switch CLI Reference Guide