Arp Timeout - HP Bc1500 - BladeSystem - Blade PC Reference Manual

IP Addressing Commands

arp timeout

The arp timeout Global Configuration mode command configures how long an entry remains in
the ARP cache. To return to the default configuration, use the no form of this command.
Syntax
arp timeout seconds
no arp timeout
Parameters
■
seconds — Time (in seconds) that an entry remains in the ARP cache. (Range: 1-40000000)
Default Setting
The default timeout is 60000 seconds.
Command Mode
Global Configuration mode
Command Usage
It is recommended not to set the timeout value to less than 3600.
Example
The following command configures the ARP timeout to 12000 seconds.
Console(config)# arp timeout 12000
11-6 www.hp.com HP PC Blade Switch CLI Reference Guide