IGMP Snooping Commands
ip igmp snooping (Interface)
The ip igmp snooping Interface Configuration (VLAN) mode command enables Internet Group
Management Protocol (IGMP) snooping on a specific VLAN. To disable IGMP snooping on a
VLAN interface, use the no form of this command.
Syntax
ip igmp snooping
no ip igmp snooping
Parameters
There are no parameters for this command.
Default Setting
IGMP snooping is disabled.
Command Mode
Interface Configuration (VLAN) mode
Command Usage
IGMP snooping can only be enabled on static VLANs. It must not be enabled on Private VLANs
or their community VLANs.
Example
The following command enables IGMP snooping on VLAN 2.
Console(config)# interface vlan 2
Console(config-if)# ip igmp snooping
10-2
www.hp.com
HP PC Blade Switch CLI Reference Guide