Priority mapping configuration commands
Priority mapping table configuration commands
display qos map-table
Syntax
display qos map-table [ dot1p-dp | dot1p-lp | dscp-dot1p | dscp-dp | dscp-dscp ] [ | { begin | exclude
| include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
dot1p-dp: 802.1p-to-drop mapping table.
dot1p-lp: 802.1p-to-local mapping table.
dscp-dot1p: DSCP-to-802.1p mapping table.
dscp-dp: DSCP-to-drop mapping table.
dscp-dscp: DSCP-to-DSCP mapping table.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display qos map-table to display the configuration of a priority mapping table.
If no priority mapping table is specified, this command displays the configuration information of all
priority mapping tables.
Related commands: qos map-table.
Examples
# Display the configuration of the 802.1p-to-local mapping table.
<Sysname> display qos map-table dot1p-lp
MAP-TABLE NAME: dot1p-lp
IMPORT
:
0
:
1
:
TYPE: pre-define
EXPORT
2
0
64