HP Bc1500 - BladeSystem - Blade PC Reference Manual page 366

System Management Commands
At any time during an active Telnet session, Telnet commands can be listed by pressing the
Ctrl-shift-6-? keys at the system prompt, as shown in the following example. Note that the
Ctrl-shift-6 sequence appears as ^^ on the screen.
Console> 'Ctrl-shift-6' ?
[Special telnet escape help]
^^ B sends telnet BREAK
^^ C sends telnet IP
^^ H sends telnet EC
^^ O sends telnet AO
^^ T sends telnet AYT
^^ U sends telnet EL
Ctrl-shift-6 x suspends the session (return to system command prompt)
Several concurrent Telnet sessions can be opened and switched. To open a subsequent session,
the current connection has to be suspended by pressing the escape sequence keys (Ctrl-shift-6)
and x to return to the system command prompt. Then open a new connection with the telnet User
EXEC mode command.
Keywords Table
Options
/echo
/quiet
/source-interface
/stream
Ctrl-shift-6 x
Ports Table
Keyword
BGP
chargen
cmd
daytime
discard
domain
echo
25-6
Description
Enables local echo.
Prevents on-screen display of all messages from the software.
Specifies the source interface.
Turns on stream processing, which enables a raw TCP stream with no
Telnet control sequences. A stream connection does not process Telnet
options and can be appropriate for connections to ports running
UNIX-to-UNIX Copy Program (UUCP) and other non-Telnet protocols.
Return to system command prompt.
Description
Border Gateway Protocol
Character generator
Remote commands
Daytime
Discard
Domain Name Service
Echo
www.hp.com
Port Number
179
19
514
13
9
53
7
HP PC Blade Switch CLI Reference Guide