Show Class-Map - HP Bc1500 - BladeSystem - Blade PC Reference Manual
Blade switch
Hide thumbs
Also See for Bc1500 - BladeSystem - Blade PC:
- User manual (216 pages) ,
- Setup and installation manual (149 pages) ,
- Supplementary manual (45 pages)
Table of Contents
Advertisement
show class-map
The show class-map User EXEC mode command displays all class maps.
Syntax
show class-map [class-map-name]
Parameters
■
class-map-name — Specifies the name of the class map to be displayed.
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command shows the class map for class1.
Console> show class-map class1
Class Map match-any class1 (id4)
Match Ip dscp 11 21
HP PC Blade Switch CLI Reference Guide
www.hp.com
QoS Commands
18-5
Advertisement
Table of Contents
