Show Ip Interface - HP Bc1500 - BladeSystem - Blade PC Reference Manual
Blade switch
Hide thumbs
Also See for Bc1500 - BladeSystem - Blade PC:
- User manual (216 pages) ,
- Setup and installation manual (149 pages) ,
- Supplementary manual (45 pages)
Table of Contents
Advertisement
IP Addressing Commands
show ip interface
The show ip interface Privileged EXEC mode command displays the usability status of
configured IP interfaces.
Syntax
show ip interface [ethernet interface-number | vlan vlan-id | port-channel port-channel
number]
Parameters
■
interface-number — Valid Ethernet port.
■
vlan-id — Valid VLAN number.
■
port-channel number — Valid port-channel number.
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following command displays the configured IP interfaces and their types.
Console# show ip interface
Gateway IP Address
------------------
10.7.1.1
IP address
-------------
10.7.1.192/24
10.7.2.192/24
11-4
Type
------
Static
Interface
---------
VLAN 1
VLAN 2
www.hp.com
Activity Status
---------------
Active
Type
-------
Static
DHCP
HP PC Blade Switch CLI Reference Guide
Advertisement
Table of Contents
