Enable Password - HP Bc1500 - BladeSystem - Blade PC Reference Manual

enable password

The enable password Global Configuration mode command sets a local password to control
access to user and privilege levels. To remove the password requirement, use the no form of this
command.
Syntax
enable password [level level] password [encrypted]
no enable password [level level]
Parameters
■
password — Password for this level (Range: 1-159 characters).
■
level — The user privilege level with the following options:
❏
1 — Allows access but not configuration rights.
❏
15 — Enables access and configuration rights.
■
encrypted — Encrypted password entered, copied from another device configuration.
Default Configuration
No enable password is defined.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following example sets local level 15 password secret to control access to user and privilege
levels.
Console(config)# enable password level 15 secret
HP PC Blade Switch CLI Reference Guide www.hp.com
AAA Commands
3-11