spanning-tree bpdu
The spanning-tree bpdu Global Configuration mode command defines BPDU handling when
the spanning tree is disabled globally or on a single interface. To return to the default
configuration, use the no form of this command.
Syntax
spanning-tree bpdu {filtering | flooding}
Parameters
■
filtering — Filter BPDU packets when the spanning tree is disabled on an interface.
■
flooding — Flood BPDU packets when the spanning tree is disabled on an interface.
Default Setting
The default setting is flooding.
Command Modes
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command defines BPDU packet flooding when the spanning-tree is disabled on an
.
interface
Console(config)# spanning-tree bpdu flooding
HP PC Blade Switch CLI Reference Guide
www.hp.com
Spanning-Tree Commands
22-13