show line
The show line User EXEC mode command displays line parameters.
Syntax
show line [console | telnet | ssh]
Parameters
■
console — Console terminal line.
■
telnet — Virtual terminal for remote console access (Telnet).
■
ssh — Virtual terminal for secured remote console access (SSH).
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode
Command Usage
If line is not specified information for all lines is given.
Example
The following command displays the line configuration.
Console> show line
Console configuration:
Telnet configuration:
SSH configuration:
HP PC Blade Switch CLI Reference Guide
Interactive timeout: Disabled
History: 10
Baudrate: 9600
Databits: 8
Parity: none
Stopbits: 1
Interactive timeout: 10 minutes 10 seconds
History: 10
Interactive timeout: 10 minutes 10 seconds
History: 10
www.hp.com
Line Commands
13-9