Ssh Commands; Ip Ssh Port - HP Bc1500 - BladeSystem - Blade PC Reference Manual
Blade switch
Hide thumbs
Also See for Bc1500 - BladeSystem - Blade PC:
- User manual (216 pages) ,
- Setup and installation manual (149 pages) ,
- Supplementary manual (45 pages)
Table of Contents
Advertisement
ip ssh port
The ip ssh port Global Configuration mode command specifies the port to be used by the SSH
server. To return to the default configuration, use the no form of this command.
Syntax
ip ssh port port-number
no ip ssh port
Parameters
■
port-number — Port number for use by the SSH server (Range: 1-65535).
Default Setting
The default port number is 22. SSH is disabled by default.
Command Mode
Global Configuration mode
Command Usage
There are no user guidelines for this command.
Example
The following command specifies the port to be used by the SSH server as 8080.
Console(config)# ip ssh port 8080
HP PC Blade Switch CLI Reference Guide
SSH Commands
www.hp.com
23
23-1
Advertisement
Table of Contents
